瑞典大三留学2021简单申请书
随着出国留学的热潮，越来越多的中国学生涌入了世界各国，其中瑞典是很多的学生申请的国家之一。下面就是小编给大家带来的瑞典大三留学2021简单申请书参考，希望能帮助到大家!
瑞典大三留学2021简单申请书
Dear _,
“Life is Like a Box of Chocolates. You Never Know What You are Going to Get”. Such words come from a famous movie “Forrest Gump”. I don’t know what kind of chocolate life will give me, but I believe I can achieve my target if I work hard with my unwavering belief and persevering efforts like Forrest Gump. As a student of Mechanical Engineering, I have just finished my undergraduate study since July. Next what I have to face is to choose the new chocolate which I have yearned for all long. With four-year study of M.E. in China, I would like to scale higher intellectual heights by undertaking advanced studies in __ University, as I believe its rich learning environment and free academic atmosphere will open my eyes to new realities and influence me to confront the situation back home.
My strong interest in research was born during the undergraduate years at _University. Upon entering the university in 2000, I began to embark on my journey of industrious study in the Department of Mechanical Engineering. My exceptionally solid foundation in mathematics and physics provided me with a stepping stone with which I proceeded onto the exploration of other sophisticated and erudite subjects. My performance in all the specialty-related coursework not only enabled me to secure good GPA ranking me about top 17 in my grade among 169 students but also furnished me with a powerful instrument whereby to materialize my dreams in the research. I constantly congratulated my luck to obtain a lot of scholarships and awards, due to my academic achievement, from the university, especially the scholarship of “_University – American United Technological Corporation”, awarded only for the best students who are both good at academic and social capacity. Not contented with doing a good job in mere coursework, I endeavored to keep abreast with the latest theories and technologies by reading extensively technical literature in recent journals and attending the lecture some famous professors made. During my undergraduate career, I have grasped every chance to do some researching work. I used to participate in at least six projects including the intern work in the factory, mechanical designs and graduate design.
Especially during the period from September to November of 2003, I read many books and journals in the field of mechanical engineering such as “Handbook of Practical Gear Design” (Written by __). In these books, I did intensive reading on the theory of the speed reducer. I investigated and discussed with my teacher on how to apply the theory into the practice. Then according to my teacher’s advice, I tried to organize a team consisting of five members to make a harmonic gear reducer. As a team leader, I should not only take charge of the whole arrangement of project but also make every member of the team cooperate with each other harmoniously. Before starting the program, I, together with my team, made a detailed plan covering the schedule, materials, and equipment. The first step of our work is the design of the reducer. The design plan is as follows: (1) Set down the blue print. (2) Complete 3-D solid model with Pro/E software. (3) Finite-element analysis with ANSYS software. (4) Assembling simulation by using Pro/E. (5) Complete the 2-D draft of part and assembly. After two-week design work, we stepped to the next work, manufacture of the product. With the aid of the technique of computer, we plan the manufacturing process of every part. And then, all parts were made with various machine tools such as CNC lathe, wire electrical discharge machine, vertical machining center, and so on. Finally, we had toassembly all parts to the harmonic gear reducer, and test-drove it for many times. With five-week unremitting efforts, we succeeded in the project of harmonic gear reducer and obtained the highest praise. This special experience makes it very helpful for my further study. Firstly, I find the connection between theory and practice. Textbooks could hardly cover everything, therefore, if we want to learn more, we should pursue every opportunity to have practices. Meanwhile, I experienced the importance and mightiness of cooperation. In the project, we divided ourselves into several parts, not only doing one’s own work well, but also cooperating with each other harmoniously.
Another case worthy mentioning is my design project for graduation, “Manufacturing and Performance of Electroplated CBN Tools”. The main objective of this project is the manufacturing of the electroplated CBN (Cubic Boron Nitride) wheels and the research of its performance when grinding the heat-resisted steel. I had completed three steps of task. Firstly, I took charge of the manufacturing of electroplated CBN wheels, covering the following work: selecting electroplating solution, computing various electroplating parameters such as electrical current and temperature, adhering CBN to the tool base by electroplating a nickel layer. After these basic preparations, I had to do the second part of the research work to compare grinding abilities of electroplated CBN wheels with those of other wheels such as SiC wheels, Al2O3 wheels etc. This part of the work needs the researcher’s highly particularity and staidness. I did the detailed work as follows: (1) Grind heat-resisted steel with various wheels in the same grinding conditions. (2) Record data and compute the grinding ratio of various wheels. (3) Measure the surface roughness of the heat-resisted steel ground by various wheels. (4) Observe dulling and pullout of abrasive grains of various wheels by using optical microscope. In this part, we can conclude that electroplated wheels have far better grinding abilities than other wheels, by comparing parameters, such as grinding ratio, surface roughness etc. The final assignment of the project is to find out the most suitable parameters of grinding heat-resisted steel with electroplated CBN wheels, through comparing the grinding ratio and surface roughness of heat-resisted steel ground in different grinding parameters. By investigating the attributes of electroplated CBN wheels and concluding their practical grinding parameters, this project is very important in promoting the application of them.
China’s unique advantage of labor force predicts the resplendent future of its Mechanical Engineering, especially the manufacture, and it is our belief that this day will come soon. On the other hand, there are so many experienced technicians in China, however, with the absence of advanced experts many advanced producing method cannot be used in practical yield. When I worked as intern in some factories, I found that most of them were still using facilities which were used in America about thirty years ago. Therefore I want to use the advanced knowledge earned in United States, combined with my acquaintance with China, to improve the present situation and apply best the advanced scientific technology to practical social wealth as soon as possible. I hope to become a successful researcher in Mechanical Engineering, the arduous but exhilarative field. The significant progress achieved in M.E, with the extraordinary cultural and intellectual sources in your university, has attracted me greatly. Based on the study and the research experience in _ University, I am sure that I am qualified and would be an outstanding Ph.D. student. With the advanced courses, balanced program and distinguished faculty of your department, I would get a solid background for my future academic career.
Yours sincerely,
xuexila
瑞典留学值得申请的艺术院校
一、国立艺术设计大学
Konstfack作为瑞典最知名、规模也的艺术类大学，为学生提供的是世界一流的教学，而且位于首都，享受有更多的社会性资源，不管是艺术还是设计领域的专业，都有不错的成就。
教学的课程都是经过检验，能够为提升学生专业技能的内容，不过授课统一采用的是瑞典语，所以大家入学，还需要保证自己能够满足语言的要求，从而确保入学资格。
二、皇家美术学院
作为曾经的君主制国家，这里也有皇家设立的美院，由于早期接受了来自官方的资助，而且有资源供应其全面的发展，所以积累下来的底蕴是非常浓厚的，学生可以享受精英教育。
学校的整体规模是比较小的，但是教学质量却更有保证，每年招收的留学生能控制在百人以下，可以很好地给予足够多的关注和支持，这样在读的每一个学生，基本上都可以实现自己的价值。
三、贝克曼斯设计学院
是一所知名的由私人创立的院校，着力于培养与设计相关的专业人才，虽然学校创立不足百年，但是名人校友的数量却不少，而且人才分布在各个领域，国际的知名度非常高。
尤其出色的是广告与平面设计，每年都会大量优秀作品诞生，而在这样的环境中学习，未来的就也会更有帮助，因为可以学习本校优秀的资源，从而为自己所用。
四、于默奥大学
上榜的一所综合类院校，作为瑞典知名大学，除了基础专业的培训，艺术类专业也有很不错的成就，能够为在读的学生提供综合性更强的教育，和其他学校的实用性技能不同。
这样就读的学生毕业之后，更多会选择从事教育类的岗位，为艺术专业的学生提供很不错的专业教育，大家可以享受很不错的专业教学的技能学习，未来更有优势。
申请瑞典留学流程解读
一、确定项目
大家需要先将自己要申请的学校确定下来，同时还要确定入学的专业，院校可以多选几个，而专业则需要保证，因为要准备的材料学校通用度更高，专业基本上都是不一样的。
瑞典的留学生申请是统一在Universityadmissions上进行的，所有和要求的项目都可以直接在上面查询得到，所以大家只需要输入自己感兴趣的目标的名字，就可以直接获取自己想要的大部分的信息。
二、查询要求
入学要求的了解，需要大家综合Universityadmissions和学校官方网站上的信息，正式的要求投放的时间有早晚，大家可以按照往年的要求先开始准备，因为大部分都是一致的。
后续再进行查询的时候，如果有不同之处，再进行修改，并且进行补充，这样也不会花费很长的时间，如果大家还有疑问的话，可以直接咨询学校，发送邮件说明出自己想要了解的内容。
三、准备申请
而具体的准备需要早早的开始，尤其是语言，取决于大家选择的授课语言，瑞典语和英语的适用范围是同样广阔的，大家确定之后就要进入到正式的培训之中，能够提前半年开始。
而学术类的材料，需要大家自行向学校提出要求开具;文书的准备在中介的帮助下书写，能够更好的把握学校的要求，建议大家尽早的将申请进行提交在，这样时间会充裕一些。
四、等待结果
申请至少会开放两轮，大家按照自己的准备进度提交申请，而结果的发放也是在一段时间内，大家需要等待1-2个月，才能够陆续的收到审核的结果。
在收到的offer中，选择自己最满意的一所进行确认并且缴纳指定的费用，才算获取了正式入学的资格，而其他的录取邀请，也需要大家进行一一的回复。
